Bees Wax Polish
Grimes & Sons Bees Wax Polish is a classic, low lustre finish, leaving a soothing natural aroma. Suitable for all internal, decorative, timber display items and furnishings. Not suitable for bench tops or other high use areas. If staining is required, apply 1 coat of Grimes & Sons Interior Stain or H₂O Interior Stain and allow to dry for 24 hours before application of Bees Wax Polish. On new timber, ensure surface is completely dry and free from wax, grease, dust, etc. We recommend that you make your own test to determine suitability for your specific use.
Apply a thin film of Bees Wax Polish with a clean brush. Work in small areas at a time, and within 5 minutes of application, polish with a clean, dry cloth (an old T-Shirt works well). For a higher sheen level, raw timber should be pre-sealed with Eggshell Oil Varnish, or Restoring Oil.
Notice: All paint contaminated cloths are prone to spontaneous combustion. Therefore, we recommend that all cloths be laid flat to dry or soaked in a bucket of water. Dispose of carefully. Keep out of reach of children.
If swallowed, call physician immediately. Keep away from heat and open flame. Avoid prolonged contact with skin and breathing of vapour. Close container after use. Use with adequate ventilation.
250 mL, 500 mL, 1 L, 4L, 10L.
H226: Flammable liquid and vapour.
H315: Causes skin irritation.
H336: May cause drowsiness or dizziness.