Exterior Oil Acrylic
Grimes & Sons Exterior Oil Acrylic is a low VOC, water based stain suitable for use on exterior timbers, particularly on deckings, windows, architraves, doors, etc.. It is based on Oil Acrylic formula with the addition of some stronger resins to produce a slightly higher sheen level & better water repellency.
Do not apply in temperatures below 10℃, above 30℃, or when rain is imminent. Coverage is ≈ 10 - 15 m²/L, depending on timber porosity and method of application. Ensure surface is completely dry and free from wax, grease, dust, etc. Stir thoroughly before and during use with a flat paddle. Keep lid closed when not in use. Apply with a clean brush, roller or spray gun. If spraying, use a 415 nozzle for a large area, or a 311 for a small area. Apply 2 coats on sheltered exterior timbers, and 3 on weathered exterior timbers. Allow 8 hours between coats. Brushes & equipment must be kept separate to avoid contamination & should be cleaned thoroughly with water.
We recommend that you make your own test on part of the job which does not show to determine suitability for your specific use. Ensure each section is completed without interruption to avoid lap marks. When first applied, Exterior Oil Acrylic has a greasy feel which will subside after a few weeks. Keep out of reach of children. If swallowed, seek medical advice.