Restoring Wax - Coloured.png

Restoring Wax

Grimes & Sons Restoring Wax is a classic, low lustre finish, leaving a soothing natural aroma. Suitable for all internal, decorative, timber display items and furnishings. Not suitable for bench tops or other high use areas. If staining is required, apply 1 coat of Grimes & Sons Interior Stain or H₂O Interior Stain and allow 24 hours to dry before application of Restoring Wax. On new timber, ensure surface is completely dry and free from wax, grease, dust, etc.

To restore old wax polishes, apply a thin film of Restoring Wax with a clean brush. Work in small areas at a time, and allow 3 minutes to soak in. Dip 000 steel wool in Restoring Wax, and in a circular motion, apply over the old/damaged/weathered coating. Wipe off excess with a cloth, ensuring colour is even. This should have restored the old coating. Apply a fresh coat of Bees Wax Polish if necessary. We recommend that you make your own test to determine suitability for your specific use. Notice: All paint contaminated cloths are prone to spontaneous combustion. Therefore, we recommend that all cloths be laid flat to dry or soaked in a bucket of water. Dispose of carefully. 

UN 1263

Paints HFP

DANGER

HARMFUL OR FATAL

IF SWALLOWED

 

KEEP OUT OF REACH OF CHILDREN

 

If swallowed, call physician immediately. Keep away from heat and open flame. Avoid prolonged contact with skin and breathing of vapour. Close Container after use. Use with adequate ventilation.